Blaine Reed Meteorites- LIST 258 - February 24, 2023

Blaine Reed Meteorites
P.O. Box 1141, Delta, CO 81416
Ph/fax (970) 874-1487
brmeteorites@yahoo.com

LIST 258 - February 24, 2023

Dear Collectors

Well, I made it back from Tucson a bit over a week ago. If I had delayed my leaving (and I did have some reasons to stay an extra day, despite my show location not being officially open on that last Sunday) I would have likely got stuck somewhere in Arizona or Utah for some days. I got home late Monday night, after a 10 plus hour drive. My attempts to get over the mountains near Telluride did not work out. That morning, the roads were supposedly clear and it was not supposed to start snowing until close to 5pm that day (with Telluride only receiving a couple inches). Well, the roads in Cortez were clearly wet. It obviously had rained/ snowed sometime that morning. At about 1pm I began trying to make my way North. Nope, a few miles out of Delores and the roads rapidly turned dangerously icy (and it looked like Dolores had received around 5 inches or so of fresh snow already that day). Had to turn back south – head over into Utah and take the Moab to I-70 route home. Even that lower route had some issues. Anyway, I eventually made it home (quite late) that night with a big snow storm right on my heels. It started snowing (and blowing) shortly after I got home. It snowed and blowed for several days straight after. I Finally was able to unload the car Thursday afternoon. If I hadn’t been able to get home Monday, it would likely have been Thursday before I could even attempt finishing the drive.

Anyway, I am back home, but a bit delayed in getting unpacked and caught up (just because I am gone doesn’t mean things pile up just as fast and high here at home). In this offering, I am putting out some of the largest, really neat pieces that I had on consignment for the show. I’d rather see if I can find a new home for them with a collector out there somewhere than spend the same $ sending them back to the owner(s) of the things. I do realize that this offering is of pieces at the high end of anything I have to offer but if you don’t try………..

I’ll have more offerings (generally of more affordable sized specimens) that came home with me from the show before too long.

NOTE: This offering is going out several days later than I had intended. I had “car troubles” (the Volt would not charge I found out as soon as the snow in the driveway was melted enough that I could get that car out of here. Nope, not going to shovel. Been there, done that. My driveway is over 450 feet long. About an 8 hour hard labor job to shovel. Around here, waiting a couple days usually gets the sun to do the work for you. Just have to have some patience. Wanted to send this out the next morning but I got a call early that day from the Chevy people in Grand Junction (the local Chevy people will NOT touch a mostly electric car). So, off to Grand Junction that morning. They had the car until 2pm before telling me they wanted another few hours to get the job done (??? – it is just a re-program thing). Turns out, they were wanting to “pad the bill” telling me that I needed new air filters, new battery for starting the small charging engine 9that allows the thing to be driven like a Prius when you run out of the primary electric charge range and more. I (stupidly) said “just get it done and quick – we have a big snow storm moving in with 60mph winds due here by 5pm (and it did blow and snow then). I finally realized that maybe I had better tell them to skip the filters and battery as those were going to add “several hours of labor” expenses. Went to the dealership *at about 3pm) and asked when it would be done if we skipped the “extra”. The thing was done right then and there. So, home I went (after paying $300 for a “program update”. Not sure why I should have to pay for something that they screwed up that caused the problem in the first place. I still have warranty on the “drive and battery systems”. For some reason, the program NOT allowing the thing to charge is NOT considered part of the “drive and battery systems). I guess I shouldn’t complain to much. I have had the car 7 and a half years and, aside from having a “programming issue” 5 or so years ago, the only thing I have had to do for the car is put tires on it (car dealers absolutely HATE these kinds of cars. They don’t make much money selling you a car, they make it on all the maintenance you are going to have to pay for to keep the warranty. Electric cars have pretty much NO maintenance needs.

Wanted to send this out the next morning (and then the one after that) but then found I have NO internet. That was out for the ENTIRE day.

So, very much delayed but, finally, you are getting to see this.

-------

Canyon Diablo
Click on image to enlarge.

Canyon Diablo
Click on image to enlarge.

CANYON DIABLO, Arizona. Iron. Coarse octahedrite (IAB).
Well, (when I wrote this up originally) I had two pieces to offer here, but I sold one of them before I could get this offering out. I had sent the photos on this offering to a person who wanted me to find them a “really nice larger Campo Del Cielo” while I was in Tucson. I found out that that was NOT going to be possible. It seems that those that have better pieces of Campo now are holding out for $1 to $2/g (!!!!) on their better/ bigger pieces. Nope, was NOT going to bring home a “nice” 2kg or 3kg Campo piece for this person’s “big iron” for their collection. They decided to take the larger piece of Canyon Diablo I had (the complete piece in the photos) instead. Anyway, the piece I have remaining is a really nice book-end. The back side shows beautiful sculpted shape. I would have found it quite hard to cut such a pretty meteorite myself, but the interior had quite a surprise waiting. This has probably the biggest graphite/ troilite nodule/ inclusion I have ever seen in a Canyon Diablo. Best of all, this is priced at or below what Campo is supposedly selling for these days.
4962 gram “bookend” – 140mm x 100mm x 80mm - $4900
=====

Gebel Kamil
Click on image to englarge.

GEBEL KAMIL Egypt. Iron. Ni-rich ataxite (ungrouped). Found 2008.
It seems that someone has figured out how to get this material once again. For a while (some years ago) it was readily available and affordable. The past few years, not so much. Any piece I got sold rapidly and, generally, for quite a bit more than $1/g. For the time being, this is THE most affordable iron meteorite once again. On my next mailed catalog (and its e-mail version those of you seeing this offering will get) I’ll have small pieces offered once again (but with a special twist). This piece here is the largest (by a loooooong shot) of any I have in my hands right now. It is a great specimen for someone looking for a really neat and special paperweight (it would also, given its shape, work really well as a door stop). This specimen is completely natural. It has been left just as it was found (well, maybe the dust has been blown off of it). This is the cheapest of any iron meteorite of its size (I have been informed that even lowly Campos are (supposedly) brining $1 to $2/g on E-bay if they have even slightly interesting shape/ features).
2293.2 gram natural shrapnel fragment – 180mm x 100mm x 50mm - $1490

,NWA 6963, Martian meteorite, shergottite.
Click on image to enlarge.

NWA (6963): Martian meteorite (shergottite). Found 2011. Tkw = about 8kg.
In September of 2011, the first pieces of this meteorite found their way into the collecting market. The find site was kept secret while the original finder(s) worked the area looking for more pieces for another 6 months. Eventually, the find location (near the river Oued Toufit) became known to others. Hundreds of meteorite hunters descended on the area shortly after. Over time, many hundreds of pieces were found, many small but some in the hundreds of grams (one close to 700 grams is known). Most of these pieces were broken and only had partial coverage of thing fusion crust. The piece I have here is “standard” in some respects. It does appear to be just a half stone (the fusion crust coverage on the “crusted” part is quite thick and nice). However, careful inspection shows that the “broken” face is really a late fall brake and has tiny dots of crust just starting to have formed on the highest points. So, this is actually a “complete individual”, even if it does not look it at first glance.
49.8 gram individual as found – 44mm x 38mm x 30mm - $9500
------

NWA (13033): Ordinary chondrite (L3).
Click on image to enlarge.

NWA (13033): Ordinary chondrite (L3). Found 2019. Tkw = 57kg.
Now THIS is a real museum piece! This is, I believe, the largest stone meteorite slice I have ever had. Even better yet, it is a type 3 showing all kinds of chondrules and clasts! This is a piece I really wish I could keep – it is a real show stopper. This comes in its own special storage box. If I need to ship it though, I’d still want to put it in a well packed larger box. It would be a serious shame to end up breaking such an incredible specimen in poor shipping packing.
2647gram complete slice – 430mm x 370mm x 5mm -$7500
-------

NWA (14016): HED achondrite (Eucrite melt breccia).
Click on image to enlarge.

NWA (14016): HED achondrite (Eucrite melt breccia). Found 2020. Tkw = 29.4kg.
This is an item that I will be offering smaller slices of in the future (maybe even my next mailed list). I saw this in Tucson, liked it and liked the price even more. This isn’t (currently) the cheapest eucrite, but it is a close second. This is, however, the cheapest eucrite that has a really nice look to it (the one cheaper one I know of - Jikharra (001) – has a very mushy interior look to it). This one is composed of angular eucrite clasts in a “sparse” melted matrix. This, very much, has the look of a moon rock, but it isn’t, and, as a consequence, is about a tenth the price. A nice end piece that has a nice somewhat thumb-printed sculpting on the back (natural) side.
1293.7 grams – 200mm x 130mm x 33mm - $3500
------------------------

RICHFIELD, Kansas: Ordinary chondrite (LL3.7)
Click on image to enlarge.

RICHFIELD, Kansas: Ordinary chondrite (LL3.7). Found 1983. Tkw = 41kg.
I once had the whole thing. Now I have only a few small slices. This is a thin slice that was cut from making one of my original large complete slices thinner. I did not know what type of meteorite this was when I sent it off for cutting all those years ago. I assumed it would likely be an L4 or something really common (I had only seen a couple very small pieces polished and they were from the solar wind darkened areas so the chondrules were somewhat hidden) so I had it cut at the standard 5mm thickness. This piece does appear to have been cut from one of the very largest slices we got from the meteorite. This piece shows the classic chondrule-rich light greenish gray areas and darker clasts dispersed throughout (those solar-wind implanted darkened areas). This comes with a M. Farmer label.
517 gram complete slice – 300mm x 210mm x 2mm - $4000
-----------------------

WINNER, South Dakota: Ordinary chondrite (L3.9)
Click on image to enlarge.

WINNER, South Dakota: Ordinary chondrite (L3.9). Found 2004. Tkw 8.5 kilograms.
This was found by a farmer who noticed a rusty looking rock when he got off his tractor to unhook a hay rake in August of 2004. Years later, it was identified as a meteorite and purchased by KD Meteorite (I remember them calling me and sending me photos of the thing for my opinion before they bought it) in 2013. This is a nice complete slice (I have one somewhere around here in a “safe place”. Can’t wait to finally re-locate that safe place – there will be all kinds of neat things waiting for rediscovery there for me). This has its original riker that it was sold in. From that, it looks like the current owner may have payed close (really close) to $4000 for the piece. However, he is willing to let it go a bit cheaper here. A really nice specimen from a place that does not have too many meteorites.
298.2 gram complete slice – 180mm x 105mm x 5mm - $3000

-------------
Shipping: Shipping rates, right now, have gone up yet again. They seem to have added a "holiday time surcharge". Now it seems that the cheapest I can send a small padded envelope order for is close to $6 at the moment. Regardless, I'll keep the shipping on these (they are small and light weight) at a simple $5 for now for US shipping.

Small overseas orders are around $16 (Canada seems to be right around $15).

I do have a fax machine that seems to work (but I have to answer it and manually turn it on), so overseas people can contact me that way if they must. However, for overseas orders, it probably is best to go ahead and use my brmeteorites@yahoo.com e-mail when possible.

Blaine Reed Meteorites For Sale- List 235

Blaine Reed Meteorites For Sale- List 235

Blaine Reed
P.O. Box 1141
Delta, CO 81416
Ph/fax (970) 874-1487
LIST 235

March 3, 2020

Dear collectors,

I am (finally) back from Tucson and (more or less) caught up on things. Some adventures this year but NOTHING like last year. The only thing that died on me this year was my hover-board (well, my uncle did pass away but that was in July of last year. None the less, that did change a few things logistically this year). I only get to use the hover board during the shows (my driveways are gravel and the runway is fairly soft dirt, when it isn’t wet – sticky deep adobe mud when it is). It seems that the battery on my toy now only wants to run for around half an hour or so (it used to last well over an hour). Welll, I was riding it pretty heavy one evening (including a couple complete trips around the hotel as they re-surfaced the parking lot recently). I thought it is getting a bit mushy/ sluggish in its response but it had only been running for 20 minutes or so. A quick glance at the battery light showed it was still green. However, as I was standing on it, moving around (and listening to music at a volume that was a tad high) and I failed to notice that it was flashing a steady “low battery” warning. Well, I leaned into it (got going pretty fast) and then tried to do a sharp turn. Nope, didn’t work out so well. When the engine on my airplane quits (which it seems to enjoy doing from time to time) most people think the thing falls out of the sky like a sack full of wet bricks. Nope, the wing works fine and, as long as I have left myself something to land on within gliding distance, it is no big deal to land and effect repairs (and fly back out when done if I really picked the landing spot well). Not so with a hover-board. When it quits (and it can indeed do it quite suddenly if you are not paying attention) it does indeed drop you to the ground like a bag of bricks. Yep, this is indeed what I did. I watched the machine roll away with a flashing red light (dead battery) signal and that is what dumped me. I managed to pull a bunch of muscles in my left leg and bung up my left hand a bit. Nothing broken (but my pride) but I did end up taking an extra day to pack down the room and load the car (I was moving quite slowly). We also had another “vanenture” on the trip home. The fan belt kept coming off of its pulleys as we were heading to Flagstaff. This happened a half dozen times (about every 8 miles – we got good at putting it back on) on the way into town. We made into town, thankfully. Blake tightened up the clamp on the upper hose on the radiator as that is where it looked the fluid leak was coming from. I wish it ended up being that easy. We ran the car for 20 minutes in the parking lot of the hotel we decided to spend the night at. No leak! So, off we went to Auto Zone to get a new tensioner pulley (it seemed to be making a bit of noise, was old and may have gotten damaged in the shock(s) of the belt coming off). Well, while there, after turning the engine off (this is when a car gets the hottest and builds up the most pressure) the radiator blew a ¼” or so hole (near the hose clamp – so we weren’t to far wrong in the spot of the leak, just what it was exactly). So, time for a radiator replacement right there in the parking lot. Unfortunately, they did not have the right one (and did not have the spare man-power to help me go pick one up). So, a 1.5mile walk (well, more of a shuffle like a post apocalyptic zombie as I had all of those torn leg muscles to deal with) to O’Reily auto parts (who DID have the right radiator but also not enough man-power in house to bring it to us – I got a Lyft back to Auto zone though). It all went together just fine but did take us until a bit after 9pm to get the job done. The next morning, starting the car brought out all kinds of bad metal on metal screeching noises. Hmmm, maybe something else (like the alternator or, my guess, the power steering pump – two items that really can’t be replaced by a couple of shmucks with limited tools in a parking lot). We ran the car for close to half an hour. The noises didn’t go away but they did lessen. My thought was “bad belt” (despite the distinctly metal on metal sounds) as if it were another mechanical failure the noises should be getting worse, not better. A quick experiment showed I was right. So, a new belt (which we now knew how to install in under two minutes) and we were on our way without further trouble (other than the 4” nail that flattened one of the new tires on the car right in the driveway in front of my house. No clue where the nail came from, just happy the thing went flat here and not while on the road. The way we were loaded it would have taken considerable effort, and lots of unloading, to get to what we needed to change a tire on a roadside somewhere). So, adventures, a couple days delay but nothing as serious or difficult as last year.

The things listed below are things that were either left with me (consignments) or I purchased at the show. The show was a bit slower this year (largely due to none of the Chinese buyers and less than half of the Japanese buyers showing up this year, thanks to the Corona virus scare) but not terrible. However, this meant that I, as I did not sell as much, I did not buy as much either. At this point, it looks like this might be my only “after Tucson” e-mail offering (unless I start turning up more smaller things I forgot I bought as I do the finishing touches on putting away all that I brought home). I suspect that my next post/ offering will be my mailed catalog which I plan to try and get out a little earlier than normal as I (supposedly) will be going to Yellowstone with some friends in the earlier part of May this year.

List 235
(click on image to enlarge)

CAMPO DEL CIELO, Agentina: Coarse octahedrite (IAB).
These are both complete slices just drastically different in sizes. The smaller piece is prepared and etched on both sides. However, this piece is small enough that you don’t get a real good idea of the etch texture of this meteorite. The large slice is really thin and, as such, is only polished and etched on one side (it would be a really, really hard job to polish out and etch this backside on a slice this thin). However, the prepared side shows a nice classic Campo etch structure.
a) 70.5 gram complete slice etched both sides – 80mm x 55mm x 3mm - $90
b) 459.4 gram complete slice etched one side – 300mm x 130mm x 2mm - $500

CANYON DIABLO, Arizona: Coarse octahedrite (IAB). Found 1891.
This is a part slice (1/4 of a complete slice – two cut edges and one long natural edge) I picked up in Tucson this year. I had offered pieces like this on my April 2019 list and rapidly sold out. When I got the chance to pick up some pieces to satisfy people that have been on a waiting list for a specimen from that offering I bought all I could. It turned out that only this piece was “left over” (I wasn’t able to get many specimens, unfortunately). This piece shows a nice vibrant etch and is etched on both sides.
47.0 gram etched part slice – 42mm x 38mm x 3mm - $94

GEBEL KAMIL, Egypt: Iron. Ni-rich ataxite, ungrouped. Found 2008.
This is a relatively large piece of the material that was found surrounding a crater in Southern Egypt that was found by way of Google Earth satellite photographs. This is a fairly young fall event, estimated to have happened around 5000 years ago. This was also very likely a witnessed event to some degree. Debris from the impact partly covered up what was an active trade route road near the crater. I personally wonder if this event isn’t part of the reason that many of the words for iron in ancient languages relate to the sky and stars (it sure would have been a wake-up call as to where some iron came from). This piece is a classic shrapnel piece as most meteorite specimens found around the crater were (I think a fairly large fusion crusted piece was found in the crater). This has the nice dark chocolate brown wind-polished surface texture over most (around ¾) of its surface. The bottom (part that was in the sand all of these years) is a bit more rusty orange in color and looks to have a couple areas of thin glass (from melting of the sand it landed in) still adhering to it. This stuff has gotten quite hard to come by lately as the folks that took the effort to pick this up some years ago have pretty much sold out (and new material is not being recovered).
2538g complete natural shrapnel fragment as found – 170mm x 80mm x 40mm - $2100

MOUNT DOOLING, Australia: Iron. Coarse octahedrite (IC). Found 1909.
Here are two great complete slices that clearly show the recrystallized etch structure pieces of this unusual meteorite shows. It was this etch structure (along with its anomalous chemistry) that showed that a “new” iron meteorite found some 400km away near Perth in 1960 was actually a transported piece of Mt. Dooling. This meteorite is a member of the fairly rare IC group of iron meteorites. Both of these pieces are etched on both sides. I have these priced quite a bit below what I priced (generally smaller) pieces of this meteorite at on a mailed list (and sold out) a couple years or so ago.
a) 106.9 gram etched complete slice – 150mm x 55mm x 2mm - $320
b) 115.9 gram etched complete slice – 155mm x 60mm x 2mm - $348

NWA (6963): Martian (Shegottite). Found 2011. Tkw = about 8 kilograms.
Originally, only about an 80g fusion crusted piece of this was recovered. Once it was found that this was a Mars rock, intensive recovery efforts lead to many more pieces (totaling somewhere around 8kg) being found. This is a wonderful super thing slice that is in a membrane style display holder (though NOT one of the “Membrane Boxes” some of us remember from some years ago). This has a small round base that allows this to be stood up on one corner for a nice shelf display (I’ll put the piece that allows this below the holder in the group photo). This slice has a nice shock vein near one side that was/ is large enough to have some gas bubbling.. These bubbles likely contained little bits of the Martian atmosphere at one time (and, if any are still intact inside this vein those likely would still contain some traces of Martian atmosphere). I have priced this quite a bit below what most people offering pieces of this material seem to be asking at this point.
5.20 gram slice – 70mm x 33mm x 1mm - $1300

NWA (8402): Stony-iron (Mesosiderite). Found 2014. Tkw = 23.85kg.
Here is a nice complete slice of this really classic looking mesosiderite. This has a wonderful mix of metal (making up around 40% of the cut surface area – often as cm sized rounded nodules) and silicates (of which around 75% is pyroxene and 25% is plagioclase). This particular meteorite was also found to have a fairly high amount of silica. This, along with the high content of plagioclase, some equilibrated silicates and lack of brecciation show this to be member of the rare A-3 type mesosiderite group. This is only the 4th meteorite known of this type. The other three are all named recoveries that are pretty much impossible for a collector to obtain: Emery, SD, Lowicz, Poland and Morristown, TN.
148.8 gram complete slice – 140mm x 75mm x 4mm - $1000

NWA (12630): Lunar, anorthositic breccia: Purchased February 2019. Tkw = 233g in two piece.
I suspect that this another piece of the stuff that came out in a big way a bit over a year ago and has lots of different NWA numbers assigned to various pieces of it (the stuff I’ve had is NWA (11273). However, this does have a distinctly different appearance to it. This is clearly an anorthositic breccia but the clasts are not nearly as clear as other specimens. I suspect that this particular part of the meteorite has suffered higher impact melting effects (or this might be a different meteorite recovery completely that got mixed in). Regardless, this is a nice complete slice in a 75mm x 60mm glass fronted display box.
1.82 gram complete slice – 30mm x 27mm x 1mm - $200

Please note:
Shipping: For small US orders $4 is OK for now. Larger orders are now $14 (insurance is extra if desired – I’ll look it up if you want it). Overseas prices have gone up A LOT the past couple years. Now small overseas orders are around $15 (I’ll have to custom quote any larger items/ orders). Registration (recommended on more valuable overseas orders) is $16.

I do have a fax machine that seems to work (but I have to answer it and manually turn it on), so overseas people can contact me that way if they must. How ever, for overseas orders, it probably is best to go ahead and use my brmeteorites@yahoo.com e-mail.

Blaine Reed Meteorites For Sale - List 164

Blaine Reed Meteorites For Sale - List 164

Blaine Reed

P.O. Box 1141

Delta, CO 81416

Ph/fax (970) 874-1487

…………………………………………………LIST 154

June 3, 2014

Dear collectors,

I wasn’t going to send out an offer this week as I had hoped to visit the Colorado Springs show this weekend (leaving only a couple days to take and pack orders). I didn’t sign up for the show as a seller (stupidly). I thought I had a couple schedule conflicts that quickly evaporated once I made the commitment that I was not going as a seller. However, a recent development has me trapped at home and in need of raising some money. It seems that my car now suddenly needs a new engine. I am not certain what happened but it happened quickly. I have had some issues over the years with this thing randomly using oil at times (usually weeks to months with no loss and then suddenly a quart disappearing over a weekend, or so it seemed). I did a fancy oil change on the thing last week, using high end long life synthetic oil and a high end long life specially made for synthetic oil filter to go with it. I then drove the thing to Ouray (a town about an hour’s drive south of us) and more the past week. Saturday I noticed some subtle but strange and scary noises coming out of the engine on one of my stops (glad I left the engine running for my quick out of the car there otherwise I might not have had ANY clue to a problem developing). I got home and put the thing in the garage. Sunday, having already forgotten about this noise, I pulled the car out to go to a hanger party some friends were having. Getting out of the car to pull the garage door shut I once again heard the noise. However it was much louder and scarier this time. Back in the garage it went (we took Blake’s car). On Monday I did a little more “research” (putting the thing on ramps listening with a make shift stethoscope) into the issue. It was very obvious very quickly – the engine is coming apart (crank and rod bearings are pretty much gone). In fact it is now to the point that I don’t even dare drive it to the shop that I plan to have put a new (well, a good used anyway) engine in the thing around 6 miles away. I am still at a loss as to what could have created this problem but I suspect that it may be a faulty oil filter or just plain old-fashioned coincidence. When I checked the oil Monday, that now supposedly had some 150 miles or so on it, it still looked like it was new and had just come from the container. I know it is synthetic but it should have had some coloration if even just from mixing with the little residual old oil that is always still left in an engine when doing an oil change. I then swapped out the oil filter (already thinking that this MIGHT be the issue). Running the car the few minutes after this to diagnose the issue did indeed seem to bring a little coloration to the oil. The new filter, unfortunately, did nothing to quiet the noise, the damage has already been done. So now I have only the big ugly (and fuel hungry) Suburban to drive until I get this fixed (I can borrow Linda’s car from time to time but not for any serious trips and only at times that she does not need it). I did manage to luck out and find a local shop that has a guaranteed good used engine (with warranty) that has somewhat less miles than my now roasted engine. Unfortunately, my car (a 2001 Subaru Forester) has a bit of a rare engine (used in only 1 year I think) so this is not going to be all that cheap. Linda’s more common 1993 Subaru could have an engine and have it installed for a total of only $1300. The engine on mine alone will run that much. With installation (and, if you are smart, a new timing belt, water pump and oil pump) I’ll be looking at around $2500 or so. A fair amount of money (particularly annoying as taxes are due in a week or so again), but certainly a better option than buying a different used car and finding it has ONLY the engine in good shape (the rest of my car is quite solid and sound mechanically).

So, here is a rather slapped together offering of some odd (and mostly expensive, unfortunately) items that I had set aside for collection or display that are now up for grabs. ALSO, please look over the last few lists I have sent out (those since the beginning of March – Lists 149, 150, 151, 152 and 153. I have many (most?) of the items (or suitable replacements except for perhaps Fukang, and NWA (8302) at this point) listed on those offerings still available. I’ll be happy to try and make you a special private “car repair funds and quarterly taxes” price on anything I still have that you are interested in off of those offerings (at least on all of the items that are mine. There are a few consignments floating around on these offerings).

Note:  Some of you will likely notice that I am no longer putting the “name” numbers in parenthesis. This may make it a little harder to read these offerings. However, I have been informed that having the parenthesis in my posts makes them very hard for people to find these specimens if they do an online search for these particular meteorites.

 

DAR AL GANI 476, Libya: Martian. Shergottite. Olivine phyric. Found 1998. Tkw = 2.20kg.

Here is a complete slice that I have been using as my Mars rock to let people handle. It is a complete slice but it is fairly thick (and thus safe to handle). This has the classic DaG look to it. It has dark (brown surrounded by black) inclusions (olivine) in a really obviously green matrix. Note: I will sell either this OR the NWA (6963) listed below but not both as I need SOMETHING to show people what a Mars rock looks like that is bigger than a thumb-nail sized slice. 
                10.4 gram complete slice – 40mm x 30mm x 4mm - $3500

MURCHISON, Australia: Carbonaceous chondrite (CM2). Fell September 28, 1969.

Here is a fragment I had set aside for a customer way back when I offered this on a mailed list around a year and a half ago. It has sat on a high shelf, forgotten (apparently by the potential customer as well) since then. I don’t remember who asked me to “set this aside” for them so now it is back up for grabs. This is a nice natural fragment that has a nice patch of fusion crust covering around 30% of the piece.

                .56 gram fragment with crust – 10mm x 9mm x 8mm - $80

NWA 032: Lunar Mare Basalt. Found October 1999. Tkw = 300 grams.

I really hesitate to sell this one. It was (and is supposed to be) in a collection of Moon rocks I have on display at a shop in Montrose (in hopes that those people in that town that want to see what a REAL moon rock looks like will get a chance to do so). I had a customer that wanted a “classic” Mare Basalt so I brought this one home to offer to him. He wants something larger and thicker. I have a number of other Lunar meteorites classified as basalts, but this is the one that truly looks like a basalt you’d find here on Earth. Anyway, I have not gotten the chance to get this back over to the display in Montrose so I will offer it here but, admittedly, not cheap. I have no idea what this stuff is going for on the market these days. I am not certain there really is any available. I got this as one of my very first (after DaG 262 anyway) Lunar meteorites (certainly my first Lunar basalt) from Alan Lang many years ago.

                .206 gram slice – 13mm x 10mm x .5mm - $600

NWA 6963, Morocco: Martian. Shergottite. Found 2011. Tkw = 8 kilograms.

This one actually has a known find location and coordinates. According to the Meteoritical Bulletin, this found in south Morocco near the river Oued Touflit. I got this nice piece from Steve Arnold in Tucson this past show. I liked it because it is an end piece and has nice crust (even showing some hints of flow lines) covering the back- side. The internal texture of this looks very much like Shegotty or the coarse grained areas of Zagami. This specimen has a few small dark shock melt pockets in it as well. This has a cut edge to it so it is not a “complete” end piece but this cut edge is such that the specimen is aesthetic none the less. A note on this one: As with the Dag (476) above, I will sell one of these but need to hang on to the other for display purposes (these two are my only “substantial” Martin pieces at the moment). So, the one that sells first is the one that I sell, the other I’ll hang on to (unless another sudden automotive or other disaster hits that is).

                5.45 gram cut end piece – 30mmx 25mm x 3mm - $1700 – nice crust covering back.

NWA 8010: Lunar. Feldspathic breccia. Found 2013. Tkw = 58 grams.

Matt asked me if I wanted to “share” a new lunar meteorite a source of his had turned up. I was hesitant as it was a lot of money. Once he cut it open though, I was sure glad I agreed to take part in this one. This is completely different than any of the other Lunar meteorites that I am aware of. This has large rounded clasts with a brown/ pinkish tinge that are filled with smaller angular to rounded light gray to white clasts. This part is neat and different. However, the really neat thing is that these larger clasts are surrounded by thick black bubbly melt veins! This thing is full of vesicles. UNM has a grad student doing work on this thing (to see what gasses and its origin that formed the bubbles among other things). I had planned to wait until this work was done before offering this thing but circumstances change. This is an end piece and is certainly tough enough to pass around and let people handle it (this is what I was doing with it). About the only thing I can fault this thing for public display/ handling purposes are that is to weird, having the big, bubbly melt veins. I have had enough local trouble with a local loon that thinks he has been finding meteorites that contain gas bubbles. I really don’t want to publicly display this one that IS real and DOES contain bubbles to the locals (and why this piece did not end up as part of the lunar display I have in Montrose right now).

                18.32 gram end piece – 50mm x 25mm x 8mm - $12k

Blaine Reed Meteorites For Sale - List 150 - yet more after Tucson stuff

Blaine Reed Meteorites For Sale - List 150 - yet more after Tucson stuff

Blaine Reed
P.O. Box 1141
Delta, CO 81416
Ph/fax (970) 874-1487
…………………………………………………………………LIST 150
March 18, 2014

Dear Collectors,

Here is yet another “after Tucson” list.

CHINGA, Russia: Ni-rich ataxite. (IVB) anomalous. Found 1913. Tkw = 80+ kilograms.
This is a nice solid (no rust scaling) end piece I picked up as part of a small collection during the show. The cut face is simply polished, not etched (this doesn’t show much when etched anyway). A nice piece for display.
196.2 gram end piece – 55mm x 28mm x 40mm - $300

FRANCONIA, Arizona: (H5). Found October 31, 2002. Tkw = 100+ kilograms.
This meteorite is interesting in that small grains of native copper have been found in cut pieces. I have not had a lot of this material over the years even though quite a lot of it was found (not sure any more is turning up these days either). I think most who found pieces kept them. Anyway, I was able to trade for a few nice complete individuals at the show. These are all distinctly complete and are covered with fusion crust, though that crust is a thin secondary crust in some areas on most of these stones. Nice small pieces.
a) 16.3 gram individual – 28mm x 18mm x 16mm - $25
b) 32.8 gram individual – 30mm x 30mm x 19mm - $50
c) 47.8 gram individual – 37mm x 30mm x 20mm - $70

NWA (unstudied): Oriented individual.
Now here is a bit of a crime. This is a quite fresh chondrite (likely L5 or L6) that was very clearly perfectly oriented. Much of the crust is brown on the front side but it clearly shows a line where it changes to black that shows how this was sitting in the ground when it was found. The front shows nice flow lines and a number of elongated “flower petal” thumb-prints. The back side (which is mostly black with some minor dirt attached – this has not been cleaned at all) shows rough textured bubbly in spots crust. There is also a very distinct bubbly roll-over rim around the edge of this piece. The “crime” is that somebody chopped off one side of this specimen (kind of like Lafayette). This does allow you to see the white interior and how surprisingly thick the fusion crust is on this stone (around 1mm thick or so). The bigger “crime” though is that the piece that was cut off was not kept with this beauty. None the less, this is a classic example of an oriented meteorite.
265.8 gram oriented ½+ individual – 85mm x 50mm x 33mm - $400

NWA (2932): Stony-iron (Mesosiderite). Found 2005. Tkw = around 15 kilograms.
This is one I wish I had more of. This is what a mesosiderite should be. This is a slice that is quite fresh and shows lots of metal (some as large round nodules) and lots of silicates (including at least one large cm sized crystal that looks like olivine but is likely pyroxene). A superb specimen for someone looking for a truly representative mesosiderite piece for their collection.
115.6 gram complete slice – 88mm x 55mm x 7mm - $1100

NWA (6963); Martian (Shergottite). Found 2011. Tkw = 8 to 10 kilograms.
This is a part slice that looks surprisingly like the coarse-grained portions of Zagami. The edges though give this one away as a find. There is one tiny (2mm x 2mm perhaps) patch of black crust but the remainder of the natural edge (about half of the specimen’s edge as two sides appear to be cut) shows some minor adhering dirt. This meteorite, like Zagami, also has a lot of Maskelynite glass, some as shock veins, though this piece shows this mostly as the occasional darkened shocked pocket rather than veins. This piece is in a neat Steve Arnold prepared riker display box and is ready for display or passing around to interested friends or lecture attendants.
2.25 gram part slice is riker display – 20mm x 12mm x 4mm - $700

QUIJINGUE, Brazil: Stony-iron (Pallasite). Found 1984. Tkw = 59 kilograms.
This meteorite was found buried one meter deep by a farmer digging holes for planting trees. He later gave it to a miner who got it identified as a meteorite. I remember when this came out some years ago. I was worried (as I am with any new pallasites) about this being a “ruster” (and some people may have indeed had problems with this, I don’t know though). However, this piece was uncoated and came from Germany (quite humid) and it looked quite fine to me (only a couple tiny rust spots is all I found). I have coated it though just to be safe. I have two pieces that were from the same slice (I broke it as someone at the show needed a smaller piece and it was clear that it would be easy to snap the piece into several smaller specimens).
a) 5.4 gram part slice – 25mm x 20mm x 3mm - $80
b) 35.9 gram part slice – 63mm x 46mm x 3mm - $525

PHILIPPINITES: Rizal province, Philippines.
Here are a few “Rizalites” I recently picked up from Alan Lang (unfortunately, these did not come with any labels). The smallest and largest pieces here are flatish and have a slightly indented bottom but both show some nice fairly deep grooving on their top sides. The middle sized piece is more the classic large round specimen (as is typical from this area) but lacks grooving to speak of.
a) 47.6 gram individual – 40mm x 40mm x 20mm - $40
b) 111.8 gram individual – 45mm x 43mm x 37mm - $84
c) 121.6 gram individual – 63mm x 53mm x 25mm - $100